Rain Pipe Irrigation

Rain hose pipe eco series 20 MM

Rain hose pipe eco series is flexible LLDPE irrigation hose with laser-punched discharge holes arranged in a zigzag pattern. It is designed for low-pressure, rain-like spray distribution across suitable crop beds and broadcast crop layouts. The specified operating pressure is 1 to 1.5 kg/cm²

Rain Hose Pipe Eco Series

5 variants · 1 on enquiry

Size

₹1,140 / piece

Boxed 14 to a box · ₹15,960 the box

MRP inclusive of tax · 5% GST

Currently out of stock. Message us on WhatsApp and we’ll let you know when it’s back.

Get a price on WhatsApp Request bulk quote

Trusted since 2007 — 1,500+ dealers across Telangana and Andhra Pradesh
Pay securely online — card, UPI or netbanking
WhatsApp support, Mon–Sat 10:00–20:00

Specifications

SKU: RDP-RP-SL-200-20
Model: RDP1910
Size: 20 MM
Length: 200 M
Wall thickness: 0.35 mm (350 micron)
Emitter spacing: zigzag
Discharge rate: laser punched hole
Operating pressure: 1 to 1.5 kg/cm2
Colour: BLACK
Material: LLDPE
Minimum order: 1 piece
Boxed: 14 pieces to a box
Weight: 2600 GRAM
Origin: Made in India

About this product

Rain Hose pipe ecoseries is a flexible hose pipe made from LLDPE material designed with a zigzag / random pattern of laser punched holes. Laser-punched discharge holes arranged in a zigzag pattern provide a rain-like spray distribution on either side at the specified low operating pressure like 1 to 1.5 kg/cm². Rain Hose is suitable for closely spaced crops like onion, vegetable crops, leafy vegetables, groundnuts, etc. This is designed to provide rain-like spray distribution for low-pressure crop irrigation.

Key features

precise design
Rain-like spray distribution on either side at the specified operating pressure
easy to install
easy to carry
light weight

Where it's used

Leafy vegetables, coriander, spinach and other close-sown beds
Groundnut, onion and garlic
Nursery beds and germination watering
Fodder and any broadcast crop where row-wise drip does not fit
Rain Pipe Irrigation systems on small and mid-size farms

Benefits

Laser-punched holes in a zigzag pattern throw a fine rain-like spray across a wide band rather than a single line
Runs at low pressure, so it works behind a modest pump where sprinklers would not
Wets a whole bed at once, which suits close-sown and broadcast crops that drip cannot reach
Rolls flat for storage and lays out quickly — one person can shift a block between plots
Provides a simple, low-pressure irrigation option for suitable crop layouts

Installation recommendations

Roll the hose out along the bed with the punched face upward, then charge it slowly — a sudden surge will roll a flat hose over and send the spray sideways. Anchor both ends and peg it at intervals on windy ground. Keep it inside its low rated pressure: rain hose is thin-walled by design and over-pressure splits it at the punch line. Flush before the first watering of the season.

Downloads

Reviews

No reviews yet

Be the first to review this product.

Reviews are checked by our team before they go live — yours could be the first one here.

From the knowledge centre

Drip for groundnut? Usually not — and what fits instead

Asked for drip for groundnut, we usually talk you out of it. The arithmetic that says so, the rain pipe that fits, and the one case drip still earns.

Before you buy

What width will it wet?

That depends on pressure and on wind more than on the hose. At its rated pressure it throws a broad band either side of the line; raise the pressure and the band widens but the droplets get finer and drift. Set it at the head, then walk the bed and see where the water actually lands.

The spray is going sideways. What do I do?

The hose has rolled. Uncharge it, lay the punched face up again, peg it, and bring the pressure up slowly rather than opening the valve fully at once.

Why is GST only 5% on this?

Micro-irrigation equipment is taxed at 5% GST. General pipe fittings are 18%, so an order that mixes the two shows both rates on the invoice. The price you see already contains the tax.

Do we need filtration for rain pipe ?

Filtration requirements depend on water quality and system design. Use suitable filtration where required to protect the punched outlets from blockage

Are your prices MRP or dealer rate?

Every price on this site is MRP, inclusive of tax. It is the same for everyone — there is no separate dealer login or hidden rate. For bulk quantities, send a bulk enquiry and we will quote on volume.

Why is GST 5% on some products and 18% on others?

Micro-irrigation equipment — drip and sprinkler systems — attracts 5% GST under Indian tax rules. General plastic pipe and fittings attract 18%. The rate that applies is shown on each product page rather than assumed.

Do I have to buy a whole box of small fittings?

No. Small drip fittings such as joiners and end caps arrive boxed — 100 to a bag, for instance — but you order in pieces and can buy a single one. The box quantity and its price are shown alongside the per-piece MRP so you can see both, and any product with a genuine minimum order states it on its page and on its data sheet.