Skip to content

Drip Irrigation

Poly End Cap VIRGIN 16 MM

16 MM virgin poly end cap for closing drip irrigation laterals

₹5 / piece

Was ₹617% off · Dussehra Special

Boxed 100 to a box · ₹500 the box

Offer price, inclusive of tax · 5% GST

Delivery calculated at checkout from your PIN code.

In stock

pcs

Minimum order 100 pieces. Boxed 100 to a box · ₹500 the box.

Or ask about it on WhatsApp
  • Trusted since 2007 — 1,500+ dealers across Telangana and Andhra Pradesh
  • Pay online, or choose cash on delivery
  • WhatsApp support, Mon–Sat 10:00–20:00

Specifications

SKU
RDP-DP-YL-EC-16
Model
RDP1533
Size
16 MM
Colour
Yellow
Material
VIRGIN
Minimum order
100 pieces
Boxed
100 pieces to a box
Package size
36 CM × 36 CM × 15 CM
Weight
350 GRAM
Origin
India

About this product

The Poly end cap VIRGIN 16 MM is a virgin-material drip irrigation fitting designed to close the end of compatible 16 MM drip laterals. It can be removed for flushing and refitted when required, making it suitable for routine drip-line operation and seasonal maintenance.

Key features

  • Virgin material construction
  • Designed for compatible 16 MM drip laterals
  • Simple push-fit installation
  • Easy to remove for flushing
  • Suitable for repeated seasonal use when handled correctly

Where it's used

  • Terminating drip laterals at the end of the row
  • Seasonal flushing of a drip block
  • Any 16 mm run that has been shortened and needs re-closing

Benefits

  • Open the end of the lateral and flush the line until the discharge is reasonably clear. Push the Poly end cap VIRGIN 16 MM fully onto the compatible 16 MM pipe end. Check that the cap is seated securely before pressurising the line. For seasonal maintenance, remove the cap, flush the lateral and ref

Installation recommendations

Flush the lateral with the end open before you cap it — capping first traps the grit that will block the far emitters. Push the cap fully home onto the pipe end. At the start of each season, pull the caps, run the block for a few minutes and refit them.

Downloads

Reviews

No reviews yet

Be the first to review this product.

Reviews are checked by our team before they go live — yours could be the first one here.

From the knowledge centre

Lay flat tube for banana: sizes, grades and pitfalls

Choosing a lay flat tube for banana blocks — 63, 75 or 90 mm, what each roll costs, the 5% GST advantage, and the pitfalls that shorten one.

Before you buy

What is the Poly end cap VIRGIN 16 MM used for?

It is used to close the end of a compatible 16 MM drip irrigation lateral.

How is the end cap installed?

Push the end cap fully onto the prepared pipe end and check that it is seated securely before pressurising the line.

Can the end cap be removed for flushing?

Yes. It can be removed to allow the lateral to be flushed and then refitted when required.

Can it be reused?

It can be reused when it remains undamaged and continues to provide a secure fit.

Does the end cap require any adhesive or solvent cement?

No adhesive or solvent cement should normally be required for a suitable push-fit connection.

Can it be left installed during seasonal storage?

Yes, provided the lateral and fitting are properly drained, cleaned and stored in suitable conditions.

Related products

Complete the setup

Often paired with

A merchandising suggestion for what typically completes a system like this — not a record of what other customers bought.