Drip Irrigation

Inline Drip pipe Aquaflow series 16 MM

Inline drip lateral pipe with 1.2 MM wall thickness, 16 MM diameter,coil length 300 M. & 500 M.

Inline Drip Pipe Aquaflow Series

2 variants

Length

₹3,586

~~Was ₹4,482~~20% off · Dussehra Special

Offer price, inclusive of tax · 5% GST

Delivery calculated at checkout from your PIN code.

In stock

pcs

Or ask about it on WhatsApp

Trusted since 2007 — 1,500+ dealers across Telangana and Andhra Pradesh
Pay online, or choose cash on delivery
WhatsApp support, Mon–Sat 10:00–20:00

Specifications

SKU: RDP-AF-IL-16-500
Model: RDP1508
Size: 16 MM
Length: 500 meter appx
Wall thickness: 1.2 mm
Emitter spacing: 40 cm
Discharge rate: 4 lph
Operating pressure: 1.0- 2.0 kg/sq cm
Colour: BLACK
Material: LLDPE
Minimum order: 1 piece
Weight: 14000 GRAM
Origin: Made in India

About this product

The Inline Drip pipe Aquaflow series 16 MM is an LLDPE inline drip lateral with a 1.2 MM wall thickness, 16 MM diameter and integrated emitters at 40 cm spacing. It is designed for compatible drip irrigation systems where controlled water application is required along crop rows. The approximately 500-meter coil provides a long lateral length for suitable field layouts.

Key features

Integrated inline drippers
LLDPE construction
16 MM diameter
1.2 MM wall thickness
40 cm emitter spacing
4 lph discharge
Designed for compatible drip irrigation systems

Where it's used

Row crops at regular spacing — cotton, chilli, tomato, brinjal, cabbage
Sugarcane and banana, including paired-row planting
Vegetable beds under shade net or polyhouse
Any field where plant-to-plant spacing is close to the 40 cm dripper pitch
Drip Irrigation systems on small and mid-size farms

Benefits

Controlled water delivery along crop rows
Integrated drippers require no field fitting
Consistent 40 cm emitter spacing
Long coil length can reduce the number of joins in suitable layouts
Suitable for fertigation with compatible water-soluble fertilisers

Installation recommendations

Lay the lateral along the crop row once the mainline and submain are charged and flushed. Connect to the submain with a grommet and take-off rather than cutting into the pipe. Leave the far end open and run the system for a few minutes so grit is carried out, then close it with an end cap. Hold the line between 1 - 2 kg/cm² neutral operating guidance based on the rated pressure.

Downloads

Reviews

No reviews yet

Be the first to review this product.

Reviews are checked by our team before they go live — yours could be the first one here.

From the knowledge centre

Lay flat tube for banana: sizes, grades and pitfalls

Choosing a lay flat tube for banana blocks — 63, 75 or 90 mm, what each roll costs, the 5% GST advantage, and the pitfalls that shorten one.

Before you buy

What is the Inline Drip pipe Aquaflow series 16 MM used for?

It is designed for drip irrigation applications where water needs to be delivered at regular intervals along crop rows.

What is the emitter spacing and dischage rate?

The emitter spacing is 40 cm and the specified discharge is 4 lph per emitter.

What is the recommended operating pressure?

recommended operating pressure of 1 to 2 kg/sq cm.

What filtration should be used with this drip pipe?

Filtration should be selected according to the water source, water quality and emitter requirements. Proper filtration helps reduce the risk of emitter blockage.

Can fertiliser be applied through the drip system?

Yes, compatible water-soluble fertilisers can be applied through a properly designed fertigation system. The fertiliser should be completely dissolved and suitable for drip irrigation.

How should the drip lateral be flushed?

Open the lateral end and flush the line until the discharged water is reasonably clear. Flush periodically according to water quality and system conditions

How should it be stored after the season?

Drain and flush the lateral, handle it carefully during removal, and store it in a clean, dry location away from conditions that could cause physical damage.

What should I do if some emitters discharge less water than others?

Check filtration, flushing, pressure, lateral condition and possible emitter blockage. Also check whether the lateral length and system layout are appropriate for the operating conditions.