Skip to content

Drip Irrigation

Inline flat drip pipe Aquaflow series 16 MM-0.2 MM

Inline flat drip pipe/tape with 0.2 MM wall thickness, 16 MM diameter and different coil length

Inline Flat Drip Pipe Aquaflow Series

2 variants

₹3,168 / piece

Was ₹3,96020% off · Dussehra Special

Boxed 5 to a box · ₹15,840 the box

Offer price, inclusive of tax · 5% GST

Delivery calculated at checkout from your PIN code.

In stock

pcs

Buy from a single piece — you do not have to take a full box. Boxed 5 to a box · ₹15,840 the box.

Or ask about it on WhatsApp
  • Trusted since 2007 — 1,500+ dealers across Telangana and Andhra Pradesh
  • Pay online, or choose cash on delivery
  • WhatsApp support, Mon–Sat 10:00–20:00

Specifications

SKU
RDP-AF-FD-02-16-1000
Model
RDP1517
Size
16 MM
Length
1000 Meters Approx
Wall thickness
0.2 mm
Emitter spacing
40 cm
Discharge rate
4 lph
Operating pressure
1 to 1.5 kg/sq cm
Colour
BLACK
Material
LLDPE
Minimum order
1 piece
Boxed
5 pieces to a box
Weight
10000 GRAM
Origin
Made in India

About this product

The Inline flat drip pipe Aquaflow series 16 MM-0.2 MM is an LLDPE flat drip pipe/tape with a 0.2 MM wall thickness, 16 MM diameter and integrated emitters at 40 CM spacing. It is designed for compatible drip irrigation installations where controlled water application is required along crop rows. The approximately 1000-meter coil provides a long continuous lateral length for suitable field layouts.

Key features

  • Integrated inline emitters
  • LLDPE construction
  • Flat construction for convenient handling and rolling
  • Consistent emitter spacing along the lateral
  • Suitable for compatible drip irrigation applications
  • Designed for controlled water application along crop rows

Where it's used

  • Seasonal vegetables such as onion, garlic, leafy greens and beans
  • Close-spaced row crops
  • Short-duration crops
  • Fields where the irrigation layout changes between crops

Benefits

  • Controlled water delivery along crop rows
  • Long coil can reduce joins in suitable layouts
  • Flat construction helps handling and storage
  • Fixed emitter spacing
  • Fast to lay and remove for seasonal applications
  • Suitable for operation within the specified pressure range

Installation recommendations

Lay the tape with the emitter seam facing upward and remove twists before charging the line. Connect it to compatible take-off fittings and operate within the specified pressure range. Flush the lateral before closing the end. Secure the end against movement, particularly in windy conditions. Avoid sharp bends, kinks and physical damage during installation and operation.

Downloads

Reviews

No reviews yet

Be the first to review this product.

Reviews are checked by our team before they go live — yours could be the first one here.

From the knowledge centre

Lay flat tube for banana: sizes, grades and pitfalls

Choosing a lay flat tube for banana blocks — 63, 75 or 90 mm, what each roll costs, the 5% GST advantage, and the pitfalls that shorten one.

Before you buy

What is the Inline flat drip pipe Aquaflow series used for?

It is designed for compatible drip irrigation systems where controlled water application is required along crop rows.

What operating pressure should be used?

The specified operating pressure is 1 to 1.5 kg/cm². The system should be operated within this range.

Is filtration required?

Appropriate filtration is recommended to reduce the risk of emitter blockage. The filtration level should be selected according to the water source, water quality and emitter requirements.

How should the flat drip pipe be installed?

Lay the lateral along the planned crop row, remove twists and kinks, connect it to a compatible take-off and flush the lateral before closing the downstream end.

How should the lateral be flushed?

Keep the downstream end open and flush the line until the discharged water is reasonably clear. Close the end only after flushing is complete.

How should the lateral length be selected?

Select the length according to the irrigation-system design, available inlet pressure, terrain and required water-distribution uniformity rather than simply using the full coil length.

How can emitter blockage be reduced?

Use appropriate filtration and periodic flushing, and maintain the irrigation system according to the water quality and operating conditions.

Can the flat drip pipe be reused?

Reuse depends on its condition after removal. Inspect for cuts, cracks, blocked emitters, stretched sections and damaged connections before reuse.

How should the pipe be stored after use?

Flush and drain it, allow it to dry where practical, roll it without sharp bends or excessive compression, and store it away from direct sunlight, excessive heat and physical damage.

What should I check if some emitters discharge less water?

Check inlet pressure, filtration, flushing, kinks, blocked emitters and the condition of the lateral. Also check whether the lateral length is appropriate for the available pressure.

Can it be used for fertigation?

Yes, compatible water-soluble fertilisers can be applied through a properly designed drip fertigation system. Fertilisers should be completely dissolved and suitable for drip irrigation.

Related products

Complete the setup

Often paired with

A merchandising suggestion for what typically completes a system like this — not a record of what other customers bought.