LDPE LAPETA HOSE PIPE 3" 8 KG

It is designed for agricultural water transfer, temporary surface irrigation and general farm water-delivery applications.

It is a flexible hose that can be rolled and stored when it is not pressurised, making it convenient for temporary and movable water-delivery applications.

The hose is supplied as a coil by weight. The coil weight identifies the amount of material supplied, while the individual product specification defines its size, length and wall thickness.

Yes. It is suitable for compatible agricultural water-transfer and temporary surface-irrigation applications.

Yes. It can be used for suitable temporary surface water-delivery layouts between a pump/source and the field.

Unroll it fully, avoid sharp bends and contact with sharp objects, connect compatible fittings securely, and introduce water gradually.

Avoid unnecessary dragging over stones, stubble, sharp edges or other abrasive surfaces. Excessive abrasion can damage the hose.

Yes. Shut off the water supply, drain the hose completely, roll it carefully and reposition it at the new location.

Drain completely, roll carefully and store away from prolonged direct sunlight, rodents, sharp objects and damaging chemicals.

Possible causes include cuts or abrasion, damaged sections, loose fittings, incorrect clamps, sharp bends or operation outside the specified conditions.

Shut off and drain the hose first. A damaged section can be cut out and reconnected using a suitable compatible coupling and clamp.

They are different pipe constructions and materials. LDPE Lapeta is made from low-density polyethylene, while Tarpaulin Lapeta uses a tarpaulin construction. Selection should be based on the application, operating pressure, handling requirements and product specifications.

It is primarily intended for flexible surface water-transfer applications. Permanent underground use should not be assumed unless the specific product and complete installation are confirmed suitable.

Every price on this site is MRP, inclusive of tax. It is the same for everyone — there is no separate dealer login or hidden rate. For bulk quantities, send a bulk enquiry and we will quote on volume.

Micro-irrigation equipment — drip and sprinkler systems — attracts 5% GST under Indian tax rules. General plastic pipe and fittings attract 18%. The rate that applies is shown on each product page rather than assumed.

No. Small drip fittings such as joiners and end caps arrive boxed — 100 to a bag, for instance — but you order in pieces and can buy a single one. The box quantity and its price are shown alongside the per-piece MRP so you can see both, and any product with a genuine minimum order states it on its page and on its data sheet.